Dual V High Performance Ball Valves Unique Dual V-ball features a seconday (small) V-notch allowing extremely small, accurate flow rates. The primary (large) V-ball provides straight through, non-clogging flow, allowing a large amount of heterogeneous fluid.		E-Seat Valves E-seat valve technology offers process purity, strength, integrity, low permeability, and high resiliency. Also offers a full range of properties formerly requiring two seperate materials.		Energy/Process Valve Featuring the High-temperature, Gratite Seat available as Buttweld, Socketweld or Threaded End. Seat design has proven performance in both energy and process applications. Gratite seats form the seat along with soft carbon used for the cushion seal.
Metaltite Metal Seated Valves Metal seated, tight shutoff valve, conforming to ANSI FCI 70-2 Class V and Class VI. Precision lapping of ball to seat and high-precision machining result in superior ball and seat interfacing for tight shutoff conforming to ANSI FCI 70-2 Class V and Class VI.		NoFill Cavity Valve Features a bi-directional floating design with maximum Cv values that provides minimal pressure drop through the valve. As its name implies, the NoFill uses no filling material of any kind. Instead the cavity has been completely eliminated.		Omni II Split Body Floating Ball Valve A new generation of ball valves with fugitive emmissions control and ISO mounting pads standard. Available in three basic style of seats - soft, hard and metal to metal. Each offers a range of performance suitable to many applications.
Three-Way Ball Valve, 4 Seats 1/2" thru 4" rugged 3-way valve design used for mixing fluids or diverting flow. Equipped with 4-Seats so either port can be used as an inlet without leakage. A single KTM 3-way valve replaces several 2-way valves, saving valuable space.		Trunnion Mounted Ball Valves, EO1100 and EO8100 Proven design features of the KTM trunnion mounted ball valves provide long life and trouble free performance. Designed for rugged oil field and pipeline applications. Features a rugged two-piece body construction.		Trunnion Mounted Ball Valves, EO1200 and EO8200 Proven design features of the KTM truunion mounted ball valves provide long life and trouble-free performance in the Petrochemical and Process industries. Features spring-loaded reinforced Teflon seat rings for positive sealing.
Unibody End-Entry Floating Ball Valve One-piece, end-entry ball valve with fugitive emmissions control and ISO mounting pad standard. Fugitive emissions control used for flammable and non-flammable applications. Features a pure white E-Seat which relieves concern over product contamination.		VS Rotary Control Valve Meticulous design of the V-Notch affords equal percentage characteristics for precise control. One-piece body design provides structural integrity and precise valve alignment. Quality machined internals ensure smooth and precise movement.		Omni 1 Split Body Floating Ball Valve EO100/SB11 Full Bore Off-the-shelf standard valve that incorperates many special features. Zero leakage with standard E-Seat technology. Pure white E-Seats relieve concern over product "popcorning" in reactive monormer applications.
Single V Control Ball Valve A rugged, longtime workhorse control valve that takes punishment in stride. Rotary-valve design provides shearing action between the V-notch ball and the seat, promoting a smooth, non-clogging operation.		Three-Way Ball Valve, 2 Seats For mixing or dividing fluids - Packing acts as seal instead of stem support, minimizing stern leaks. Features a stainless steel static grounding device. Two-seat design has lower operating torque, easing operation and reducing actuator cost.		Three-Way Top Entry Ball Valve, 4 Seats 6" thru 8" top entry 3-way valve design used for mixing fluids or diverting flow. Equipped with 4-Seats so either port can be used as an inlet without leakage. Features a blow out-proof stem.